Check the compatibility with your bike and/or the required mounting kits
||FR221B||Front/Rear||10.00 € (Kit 2 pcs.)|
||EE078H||Front/Rear||20.00 € (Pair)|
To fit the indicators, the adapters are required.
FR221B (1 hole) - One kit contains 2 pieces. These adapters are made of PVC.
FR221B for front and rear indicators.
FR221B: mounting kit for front and rear turn signals. One kit contains 2 pieces. These adapters are made of PVC.
EE078H: Wiring kit for front and rear Rizoma indicators
Functions: INDICATOR (12 V - 3,4 W)
To fit the indicators, the wiring kit is required.
Rizoma indicators come standard with a pair of resistors (10 W - 15 Ω).
When replacing OEM turn signals with the Rizoma Vision, with sequential flashing, to avoid incompatibility due to the resistors and the OEM electronic control unit, Rizoma always recommends the substitution of four Vision turn signals, two in front position and two for the rear (excluding cases where the turn signals are integrated in the front optical unit, in the rear-view mirror or in the front fairing).
A: This product is certified compliant. To know whether a product is certified compliant, just check for the presence of the letter E immediately followed by a number enclosed in a circle.
Q: What are the electrical specifications?
A: 12V 3.4W
Q: Which lighting technology is used?
A: SMD LED Technology (Surface-Mounted-Device).
Q: What advantages are there to fitting SMD LED indicators?
A: Compared to normal bulbs, LEDs last longer, are brighter and take up less space.
Q: Are resistors included in the package?
A: Yes, 2 resistors are included with each individual tunr signal (10W/15 Ohm ea.)
Q: What is the significance of fitting indicators in either series or parallel?
A: An 'in series' connection is when two or more components are connected so that they make up a single route for the electrical current to pass through$$ if the components have two poles (i.e. are bi-polar), an 'in series' connection requires that one end of each component is connected only to one end of another, with the current flowing in through the free terminal on the first bi-polar component and out through the free terminal on the last bi-polar component. (see diagram 2 in the assembly instructions) - An 'in parallel' connection, on the other hand, is when the components are connected to a pair of conductors so that the electrical voltage is applied equally to all of the components. To understand this better, here's an example with two people: two people are standing between two ropes which are stretched out and parallel to each other. Each of the two people is holding one of the ropes in each hand so that both are holding the same rope with the right hand and the same rope with the left hand.
(see diagram 3 assembly instructions)
Q: I only fitted 2 Rizoma turn signals on my motorcycle but they don't flash correctly. How do I fix this problem?
A: On motorcycles tested by our R&D department, we always fit four turn signals (where possible). We recommend that you seek advice from a specialist workshop or use resistors to adjust the current.
Q: My motorcycle is fitted with LED turn signals as standard. Do I need to use resistors when fitting Rizoma turn signals?
A: No, these are not generally used.
Q: My bike, as OEM equipment, has two-function front turn signals (front position light and turn signal). By mounting the Rizoma Vision turn signal, the double function still works?
A: No, by mounting the Vision turn signal the position light function will be lost, Vision has the turn signal with sequential lighting function only.